This guide contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.
A tired chest of drawers from a charity shop can become the best-looking piece in your home for the price of a tin of paint. Painting furniture is easy to learn, but skipping steps is why so many projects chip and peel within months. This guide covers the steps that matter, the kit you need and the mistakes to avoid.
What you’ll need
- Sugar soap or a degreasing cleaner
- Sandpaper or sanding sponges (120 and 240 grit)
- A tack cloth or damp lint-free cloth
- Primer suited to your surface
- Furniture paint (chalk paint or a water-based eggshell or satinwood)
- A good synthetic brush and a small foam roller
- Clear topcoat (water-based varnish or wax) for surfaces that get a lot of use
- Screwdriver, masking tape and dust sheets
Step 1: Choose the right piece
Solid wood and good-quality veneer paint beautifully. Check drawers run smoothly and joints are firm. Avoid pieces with flaking laminate or water-swollen chipboard, because paint won’t fix those. Charity shops, second-hand selling apps and local selling groups are full of sturdy pieces in dated finishes, which are perfect.
Step 2: Take it apart
Remove handles, knobs and hinges, and take out the drawers. Keep screws in a labelled bag. If you’re replacing handles with a different size, fill the old holes with wood filler now.
Step 3: Clean it properly
Old furniture is coated in grease, polish and dust, and paint won’t stick to any of them. Scrub every surface with sugar soap and warm water, rinse with clean water and let it dry completely. This is the step people skip, and the main reason paint peels.
Step 4: Sand to give the paint grip
You don’t need to strip back to bare wood. A light “scuff sand” with 120 grit takes the shine off varnish and gives primer something to grip. Sand with the grain, then wipe away every bit of dust with a tack cloth.
Step 5: Prime
Primer stops stains bleeding through and helps paint stick to shiny surfaces. Use a stain-blocking primer on pine (knots bleed yellow) and on dark wood like mahogany (it bleeds pink). Even “no-prep” chalk paints benefit from primer on glossy or oily surfaces.
Step 6: Paint in thin coats
Thin coats dry harder and look smoother than thick ones.
- Stir the paint well.
- Use a brush for edges and detail, and a foam roller for flat surfaces.
- Work in the direction of the grain and don’t overwork it.
- Let each coat dry fully, and check the tin, as some need several hours.
- Lightly sand between coats with 240 grit for a really smooth finish.
Two or three thin coats is usual. Dark colours over light wood may need three.
Step 7: Seal surfaces that get used
Tabletops, chests of drawers and anything that gets wiped or knocked need a protective topcoat. A water-based clear varnish in matt or satin is the hardest-wearing and won’t yellow. Wax gives a soft, chalky look but needs re-applying. Apply two thin coats.
Step 8: Let it cure before using it
Paint feels dry in hours, but it takes days or even weeks to fully harden. Put things on it gently for the first week, and avoid sliding heavy objects across the top.
Finishing touches
New handles change a piece completely. Brass, wood or leather pulls cost a few pounds each and make a budget piece look bespoke. Lining drawers with wallpaper offcuts adds a lovely surprise.
Rough cost of a chest of drawers makeover
| Item | Rough cost |
|---|---|
| Second-hand chest of drawers | £20 to £40 |
| Sugar soap and sandpaper | £8 |
| Primer (small tin) | £10 |
| Furniture paint (750ml to 1 litre) | £15 to £25 |
| Clear topcoat | £10 |
| New handles | £8 to £20 |
| Total | about £70 to £110 |
Mistakes to avoid
- Skipping cleaning. Grease is invisible and paint won’t stick to it.
- Thick coats. They sag, drip and stay soft.
- No primer on pine or mahogany. Stains bleed through even three coats.
- Painting in the cold. Below about 10°C most paints dry badly.
- Using it too soon. Give it a week before heavy use.
Frequently asked questions
Do I have to sand furniture before painting?
A light sand is almost always worth it, even with chalk paint. It takes minutes and helps paint grip far better on varnished surfaces.
What is the best paint for wooden furniture?
Chalk paint is easiest for beginners, while water-based eggshell or satinwood gives a tougher, smoother finish. Either works if you clean, prime and seal properly.
How do I avoid brush marks?
Use a good synthetic brush, add a foam roller for flat areas, keep coats thin and sand lightly with fine sandpaper between coats.

Leave a Reply